A6818SEP
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Output Current | -40mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:32 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6818SEP Overview
The LED driver's packaged as a Tube.This package is included in 44-LCC (J-Lead).A Surface Mount mounting is used for the LED driving board.The switch type is Latched Driver.To ensure reliable operation, the temperature should be set to -20°C~85°C TA.By default, it is set to output 32.With a supply voltage of 3V~5.5V, the LED driving board operates.It produces a maximum output voltage of Bipolar volts at its maximum output.It belongs to the family A6818.A total of 44 terminations can be found in it.It consists of 1 functions.Maximum output current falls to 40mA when operation criteria are met.The supply voltage can be 3.3V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.In total, it has 44 pins.This case has the output current set to -40mA.A self-contained econtainer holding Display Drivers capacity contains this lighting driver.It has a power supply of 3.3/560V.Through the use of this lighting driver, we can also produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6818SEP Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818SEP Applications
There are a lot of Allegro MicroSystems A6818SEP Power Switches ICs applications.
- USB Power Distribution
- Hot Swap
- Solid-State Drives
- Portable Music Players
- Wearable Devices
- Various applications equipped with buttons
- Low Voltage I/O System Power
- Portable Video Game Players
- Wireless Modem Data Cards
- Handheld Devices
