A6818SEP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 9mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 25mA |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6818SEP-T Overview
The package is in the form of a Tube.It is included in the package 44-LCC (J-Lead).A Surface Mount mounting is used for the LED driving board.Latched Driver is the switch type that it owns.Ensure reliable operation by setting the temperature to -20°C~85°C TA.There are 32 outputs available on this lighting driver.With a supply voltage of 3V~5.5V, the LED driving board operates.There is a maximum output voltage of Bipolar volts on this LED driver.The A6818 family consists of this type.It has a total of 44 terminations.There are 1 functions of the LED driver.Maximum output current falls to 40mA when operation criteria are met.As long as the supply voltage is 3.3V, high efficiency can be achieved.The lighting driver is mounted in the direction of Surface Mount.It is equipped with a total of 44 pins.A self-contained container with a capacity of Display Drivers contains this lighting driver.The power supply of the part is 3.3/560V.The LED driver can also be used to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6818SEP-T Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818SEP-T Applications
There are a lot of Allegro MicroSystems A6818SEP-T Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Portable Devices
- Wireless Headsets
- HDD, SSD
- HDD and SSD
- Notebook and Tablet Computers
- Portable GPS Device
- PC Cards
- Storage Drives
- Solid State Drivers
