A6818SEPTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CAN ALSO OPERATE WITH 5V LOGIC SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6818 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 40mA |
| Power Supplies | 3.3/560V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Supply Current-Max | 9mA |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Characteristics | OPEN-EMITTER |
| Output Current per Channel | 25mA |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:32 |
| Input Characteristics | STANDARD |
| Voltage - Load | 60V Max |
| fmax-Min | 10 MHz |
| Supply Voltage1-Nom | 60V |
| Number of Segments | 32 |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6818SEPTR Overview
A Tape & Reel (TR) is used to package it.This file is included in package 44-LCC (J-Lead).The lighting driver is mounted in the Surface Mount position.Latched Driver is the type of switch owned by it.To ensure reliable operation, set the temperature to -20°C~85°C TA.The LED driver has 32 outputs.Operation is based on 3V~5.5V supply voltage.The maximum output voltage is Bipolar volts.I believe it belongs to the A6818 family.It consists of 44 terminations in total.As far as functions are concerned, the lighting driver has 1.This results in the maximum output current dropping to 40mA to meet the operation criteria.The supply voltage of 3.3V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.There are 44 pins in total on this board.The LED driver is self-contained in an econtainer with Display Drivers capacity.The power supply of the part is 3.3/560V.Using this LED driver, it is also possible to produce CAN ALSO OPERATE WITH 5V LOGIC SUPPLY.
A6818SEPTR Features
Supplied from 3.3V
Additional features like CAN ALSO OPERATE WITH 5V LOGIC SUPPLY
A6818SEPTR Applications
There are a lot of Allegro MicroSystems A6818SEPTR Power Switches ICs applications.
- Smartphone and PDA
- Hard Disk Drives
- Handheld Devices
- Hot Swap
- USB Power Distribution
- Set-top-box
- PDAs
- Telecom and Network Systems
- Solid State Drivers
- Notebook PC
