A6821EA-T
| Parameters | |
|---|---|
| Length | 19.05mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6821 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 8 |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.33mm |
A6821EA-T Overview
It is packaged in the form of a Tube.It's included in the 16-DIP (0.300, 7.62mm) package.The lighting driver has the mounting type Through Hole.It owns the Latched Driver switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There are 8 outputs available on this lighting driver.To operate, it needs a supply voltage of 3V~5.5V.It produces a maximum output voltage of Bipolar volts at its maximum output.As you can see, it comes from the A6821 family.There are 16 terminations in it.The 16 pins are used to operate the LED driver.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 500mA.High efficiency is possible when the supply voltage is set to 3.3V.In this case, it is mounted in the way of Through Hole.The LED driving board is equipped with a total of 16 pins.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The lighting driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.In this case, the power supply is 3.3/5V.
A6821EA-T Features
Supplied from 3.3V
A6821EA-T Applications
There are a lot of Allegro MicroSystems A6821EA-T Power Switches ICs applications.
- PC Cards
- Portable GPS
- Wearable Devices
- Hot Swaps
- Wireless/Networking Cards
- USB Power Distribution
- Set-top-box
- Solid-State Drives
- Portable GPS Device
- Handheld Devices
