A6832EEP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6832 |
| Pin Count | 44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Voltage | 40V |
| Output Type | Bipolar |
| Max Output Current | 125mA |
| Supply Voltage-Max (Vsup) | 5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 125mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Max Output Voltage | 40V |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 40V Max |
| Output Peak Current Limit-Nom | 125A |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6832EEP-T Overview
The package is in the form of a Tube.It is included in the package 44-LCC (J-Lead).Surface Mount is the mounting type of the LED driver.The switch type of this switch is Latched Driver.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There are 32 outputs available on this lighting driver.The LED driving board operates with a supply voltage of 3V~5.5V.A maximum output voltage of Bipolar volts can be achieved by this LED driver.As you can see, it comes from the A6832 family.It has a total of 44 terminations.The 44 pins are used for the operation of the system.It consists of 1 functions.The maximum output current is reduced to 125mA to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.44 pins are equipped with it.When this case is used, the output current is set to 125mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.Vsup (maximum supply voltage) is set to 5V.For normal operation, the supply voltage (Vsup) must be kept above 3.3V.In this case, the power supply is 3.3/5V.
A6832EEP-T Features
A6832EEP-T Applications
There are a lot of Allegro MicroSystems A6832EEP-T Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Solid State Drivers
- Hot Swaps
- Telecom and Network Systems
- Set-top-box
- Wireless Headsets
- Hot Swap
- PC Card Hot Swap
- Hot-Swap Systems
- Notebook PC
