A6832EEPTR-T
| Parameters | |
|---|---|
| Max Output Current | 125mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 40V Max |
| Output Peak Current Limit-Nom | 125A |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | BIMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6832 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Voltage | 40V |
| Output Type | Bipolar |
A6832EEPTR-T Overview
It is package in Tape & Reel (TR) case.The 44-LCC (J-Lead) package contains it.The mounting type of the LED driver is Surface Mount.There is a switch type of Latched Driver.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 32 outputs in the lighting driver.In order to operate, it requires a voltage supply of 3V~5.5V.Voltage output is Bipolar volts at maximum.It belongs to the A6832 family.In total, there are 44 terminations.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 125mA.A supply voltage of 3.3V leads to high efficiency.This lighting driver is mounted in the way of Surface Mount.44 pins are connected to it in total.It is self-contained in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 3V.In this part, the power supply is set to 3.3/5V.
A6832EEPTR-T Features
Supplied from 3.3V
A6832EEPTR-T Applications
There are a lot of Allegro MicroSystems A6832EEPTR-T Power Switches ICs applications.
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- HDD, SSD
- PDAs
- USB Power Distribution
- USB Power Distribution
- Hot-Swap Systems
- Storage Drives
- Portable Video Game Players
- Hot Swaps
