A6832SEP-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6832 |
| Pin Count | 44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Voltage | 40V |
| Output Type | Bipolar |
| Max Output Current | 125mA |
| Supply Voltage-Max (Vsup) | 5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3.3V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 125mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 40V Max |
| Output Peak Current Limit-Nom | 125A |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6832SEP-T Overview
It's?packaged?in?the way?of?a?Tube.This package is included in 44-LCC (J-Lead).It has been mounted as Surface Mount on the LED driver.It owns Latched Driver switch type.It is recommended to set the temperature to -20°C~85°C TA in order to ensure reliable operation.As a default, the output is set to 32.Operation is based on a supply voltage of 3V~5.5V.The maximum output voltage is Bipolar volts.It is part of the A6832 family of LED drivers.A total of 44 terminations have been recorded.During operation, the 44 pins are used.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 125mA.As a result, it is mounted in the manner of Surface Mount.A total of 44 pins are present on it.When this is the case, the output current is set to 125mA.It is self-contained in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this LED driver is 5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3.3V.This part's power supply is 3.3/5V.
A6832SEP-T Features
A6832SEP-T Applications
There are a lot of Allegro MicroSystems A6832SEP-T Power Switches ICs applications.
- Set-top-box
- Portable/Handheld Devices
- Wireless Modem Data Cards
- Portable Devices
- USB Ports/Hubs
- Notebook PC
- Set-Top Boxes
- Hot-Swap Systems
- Portable Video Game Players
- USB Protection
