A6832SEPTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Peripheral Drivers |
| Technology | BIMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6832 |
| Pin Count | 44 |
| Number of Outputs | 32 |
| Qualification Status | Not Qualified |
| Output Voltage | 40V |
| Output Type | Bipolar |
| Max Output Current | 125mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 125mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:32 |
| Voltage - Load | 40V Max |
| Output Peak Current Limit-Nom | 125A |
| Height Seated (Max) | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6832SEPTR-T Overview
It is packaged in the manner of a Tape & Reel (TR).The 44-LCC (J-Lead) package contains it.A Surface Mount mounting is used for the LED driving board.The switch type is Latched Driver.It is recommended that the temperature be set to -20°C~85°C TA for reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of 3V~5.5V.It has a maximum output voltage of Bipolar volts.It is part of the A6832 family of LED drivers.In total, there are 44 terminations.For operation, we use the 44 pins.It has 1 functions.This results in the maximum output current dropping to 125mA to meet the operation criteria.The supply voltage of 3.3V is conducive to high efficiency.Surface Mount is mounted in the way of this LED driving board.A total of 44 pins are included in this LED driver.In this case, the output current is set to 125mA.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.The LED driver is configured with a maximum supply voltage of 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 3V.A 3.3/5V power supply is used by the part.
A6832SEPTR-T Features
Supplied from 3.3V
A6832SEPTR-T Applications
There are a lot of Allegro MicroSystems A6832SEPTR-T Power Switches ICs applications.
- Hot Swap
- Portable/Handheld Devices
- Handheld Devices
- PC Card Hot Swap
- USB Protection
- PC Cards
- USB3.1 Power Delivery
- Hot Swap
- Hard Disk Drives
- Portable Devices
