banner_page

A6833SEPTR-T

3.3/5V Bipolar 1.27mm PMIC A6833 44 Pin 3.3V 44-LCC (J-Lead)


  • Manufacturer: Allegro MicroSystems
  • Nocochips NO: 26-A6833SEPTR-T
  • Package: 44-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 964
  • Description: 3.3/5V Bipolar 1.27mm PMIC A6833 44 Pin 3.3V 44-LCC (J-Lead) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 44-LCC (J-Lead)
Number of Pins 44
Operating Temperature -20°C~85°C TA
Packaging Tape & Reel (TR)
Published 2005
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 44
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
HTS Code 8542.39.00.01
Subcategory Peripheral Drivers
Technology BIMOS
Terminal Position QUAD
Terminal Form J BEND
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 1.27mm
Base Part Number A6833
Pin Count 44
Number of Outputs 32
Qualification Status Not Qualified
Output Voltage 30V
Output Type Bipolar
Max Output Current 125mA
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 3V
Interface Strobe, Serial
Output Configuration Low Side
Output Current 125mA
Voltage - Supply (Vcc/Vdd) 3V~5.5V
Input Type Non-Inverting
Switch Type Latched Driver
Ratio - Input:Output 1:32
Voltage - Load 30V Max
Output Peak Current Limit-Nom 0.125A
Height Seated (Max) 4.57mm
Length 16.59mm
Width 16.59mm
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

A6833SEPTR-T Overview


The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 44-LCC (J-Lead) package.A Surface Mount mounting is used for the LED driving board.There is a Latched Driver switch type associated with it.To ensure reliable operation, the temperature should be set to -20°C~85°C TA.The lighting driver has a total of 32 outputs that are available for use.In order to operate, it requires a voltage supply of 3V~5.5V.A maximum output voltage of Bipolar volts can be obtained with this LED driver.The A6833 family consists of this type.It has a total of 44 terminations.In order to operate, 44 pins are used.It has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 125mA.A supply voltage of 3.3V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.44 pins are connected to it in total.In this case, the output current will be set to 125mA.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage for this LED driver is 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.In this part, the power supply is set to 3.3/5V.

A6833SEPTR-T Features


Supplied from 3.3V

A6833SEPTR-T Applications


There are a lot of Allegro MicroSystems A6833SEPTR-T Power Switches ICs applications.

  • HDD and SSD
  • USB Power Distribution
  • Smart Phones, Feature Phones
  • Set-top-box
  • Gaming
  • PDAs
  • Solid-State Drives
  • Wireless Headsets
  • Solid State Drivers
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good