A6841SA-T
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Number of Pins | 18 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | SPLIT SUPPLY OPERATION POSSIBLE |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Base Part Number | A6841 |
| Pin Count | 18 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Polarity | NPN |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Max Output Voltage | 50V |
| Switch Type | Latched Driver |
| Collector Emitter Voltage (VCEO) | 50V |
| Ratio - Input:Output | 1:8 |
| Collector Emitter Breakdown Voltage | 50V |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 8 |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 5.33mm |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6841SA-T Overview
It's?packaged?in?the way?of?a?Tube.There is a package for it in the 18-DIP (0.300, 7.62mm) package.Mounting type Through Hole is selected for the LED driving board.It owns the Latched Driver switch type.It is best to set the temperature to -20°C~85°C TA to ensure reliable operation.The LED driver has a total of 8 outputs.With a supply voltage of 3V~5.5V, the LED driving board operates.A maximum voltage of Bipolar volts is available from the output of this LED driver.The A6841 family consists of this type.In total, there are 18 terminations.The 18 pins are used to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.In this case, it is mounted in the way of Through Hole.As a result, it has a total of 18 pins.When this case is used, the output current is set to 500mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 3V.3.3/5V is the power supply of the part.SPLIT SUPPLY OPERATION POSSIBLE can also be produced by using this LED driver.
A6841SA-T Features
Supplied from 3.3V
Additional features like SPLIT SUPPLY OPERATION POSSIBLE
A6841SA-T Applications
There are a lot of Allegro MicroSystems A6841SA-T Power Switches ICs applications.
- Solid-State Drives
- Wireless Headsets
- Solid State Drivers
- Smart Phones, Feature Phones
- Portable Music Players
- Wireless/Networking Cards
- Storage Drives
- Wearable Devices
- Notebook PC
- Wireless Modem Data Cards
