A6841SLWTR-20-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -20°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | SPLIT SUPPLY OPERATION POSSIBLE |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6841 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Bipolar |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 8 |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6841SLWTR-20-T Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 20-SOIC (0.295, 7.50mm Width).It has been mounted as Surface Mount on the LED driver.The switch type of this switch is Latched Driver.It is best to set the temperature to -20°C~85°C TA to ensure reliable operation.In this LED driver, there are no outputs available.A voltage of 3V~5.5V is used to power it.The maximum output voltage is Bipolar volts.As you can see, it comes from the A6841 family.It contains 20 terminations.During operation, the 20 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current is reduced to 500mA to meet the operation criteria.A supply voltage of 3.3V leads to high efficiency.In this case, it is mounted in the way of Surface Mount.A total of 20 pins are present on it.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 3V.There is a voltage supply of 3.3/5V volts on this part.As a result of using this lighting driver, SPLIT SUPPLY OPERATION POSSIBLE can also be produced.
A6841SLWTR-20-T Features
Supplied from 3.3V
Additional features like SPLIT SUPPLY OPERATION POSSIBLE
A6841SLWTR-20-T Applications
There are a lot of Allegro MicroSystems A6841SLWTR-20-T Power Switches ICs applications.
- PC Cards
- USB Protection
- HDD, SSD
- PDAs
- Solid-State Drives
- Set-top-box
- Storage Drives
- Notebook and Tablet Computers
- Wearable Devices
- Set-Top Boxes
