A6A-10CS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Insulation Material | POLYBUTYLENE TEREPHTHALATE |
| Weight | 800mg |
| Actuator Material | POLYACETAL |
| Center Contact Material | PHOSPHOR BRONZE |
| Terminal Material | BERYLLIUM COPPER |
| End Contact Material | PHOSPHOR BRONZE |
| End Contact Plating | GOLD OVER SILVER |
| Operating Temperature | -10°C~70°C |
| Packaging | Tray |
| Published | 2004 |
| Series | A6A |
| Feature | IP64 - Dust Tight, Water Resistant |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Termination | PC Pins |
| ECCN Code | EAR99 |
| Number of Positions | 10 |
| Voltage - Rated | 28VDC |
| Additional Feature | WITH O-RING |
| HTS Code | 8536.50.90.20 |
| Voltage - Rated DC | 28V |
| Pitch | 0.100 2.54mm Full |
| Orientation | Straight |
| Terminal Pitch | 2.54mm |
| Current Rating | 100mA |
| Termination Style | PC Pin |
| Actuator Type | Rotary with Shaft |
| Circuit | BCD Complement |
| Contact Resistance | 200mOhm |
| Insulation Resistance | 10MOhm |
| Contact Current(DC)-Max | 0.1A |
| Dielectric Withstanding Voltage | 500VAC V |
| Electrical Life | 2,000 Steps |
| Throw Configuration | SP10T |
| Max Voltage Rating (DC) | 28V |
| Mechanical Life | 10,000 Steps |
| Switch Type | ROTARY CODED SWITCH |
| Contact Current Rating | 100mA |
| Switching Voltage | 28V |
| Contact Timing | BREAK-BEFORE-MAKE |
| Index Angle | 36 deg |
| Number of Switch Sections | 1 |
| PCB Hole Count | 5 |
| Contact Function | ON-ON |
| Switch Action | LATCHED |
| Washable | Yes |
| Actuator Level | Raised |
| Switching Current | 100mA |
| Length | 0.393 10.00mm |
| Body Height | 5.9mm |
| Actuator Length | 7.3mm |
| Height Above Board | 0.531 13.49mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
See Relate Datesheet
