A6A259KLB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Addressable Latch Mode |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 1.7Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6A259 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Inverting, Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 350mA |
| Ratio - Input:Output | 3:8 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed) |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 1 Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6A259KLB Overview
As a result, it is packaged in the form of a Tube.Package 24-SOIC (0.295, 7.50mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.There is a Latched Driver switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~125°C TA.The LED driver is equipped with 8 outputs.To operate, it needs a supply voltage of 4.5V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Addressable Latch Mode features.I believe it belongs to the A6A259 family.In total, there are 24 terminations.There are 1 functions of the LED driver.The maximum output current is reduced to 1.1A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 24 pins.There is 1.7Ohm resistance on the LED driver.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 4.5V.This part has a power supply of 5V.
A6A259KLB Features
Supplied from 5V
Resistance of 1.7Ohm
A6A259KLB Applications
There are a lot of Allegro MicroSystems A6A259KLB Power Switches ICs applications.
- Hot Swap
- Low Voltage I/O System Power
- Telecom and Network Systems
- Solid State Drivers
- HDD, SSD
- PDAs
- Notebook PC
- Hard Disk Drives
- Wireless Headsets
- Portable GPS Device
