A6A595KLB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 1.7Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6A595 |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.1A |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 100 ns |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 350mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed) |
| Output Peak Current Limit-Nom | 1.1A |
| Rds On (Typ) | 1 Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6A595KLB Overview
Tube is how it's packaged.Package 24-SOIC (0.295, 7.50mm Width) contains it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is Latched Driver.To ensure reliable performance, the temperature should be set to -40°C~125°C TA.The LED driver has a total of 8 outputs.With a supply voltage of 4.5V~5.5V, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.As you can see, it comes from the A6A595 family.It has a total of 24 terminations.The operation is performed through the 24 pins.It consists of 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1.1A.It is possible to obtain high efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Surface Mount.24 pins are equipped with it.In this LED driving board, there is 1.7Ohm resistance.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.This part's power supply is 5V.When using this LED driving board, it is recommended that the supply voltage is set to 5V.Total, there are 1 elements.
A6A595KLB Features
Supplied from 5V
Resistance of 1.7Ohm
A6A595KLB Applications
There are a lot of Allegro MicroSystems A6A595KLB Power Switches ICs applications.
- Handheld Devices
- HDD and SSD
- USB Ports/Hubs
- Hard Disk Drives
- Mobile Communication Devices
- Hot Swap
- Hot Swap
- Telecom and Network Systems
- Various applications equipped with buttons
- Notebook PC
