A6B259KA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6B259 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Interface | On/Off |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 150 ns |
| Input Type | Inverting, Non-Inverting |
| Switch Type | Latched Driver |
| Family | 6B |
| Output Characteristics | OPEN-DRAIN |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 3:8 |
| Logic IC Type | OTHER DECODER/DRIVER |
| Voltage - Load | 50V Max |
| Rds On (Typ) | 5.5 Ω |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 5.33mm |
| Length | 25.905mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6B259KA Overview
It is package in Tube case.It is included with the 20-DIP (0.300, 7.62mm) package as well.Mounting type Through Hole is selected for the LED driving board.The switch type is Latched Driver.To ensure reliable operation, the temperature should be set to -40°C~125°C TA.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of 4.5V~5.5V.A maximum voltage of N-Channel volts is available from the output of this LED driver.The A6B259 family consists of this type.It contains 20 terminations.The operation is performed through the 20 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current must drop to 500mA to meet the operation criteria.High efficiency is possible at 5V supply voltage.It is mounted in the way of Through Hole.20 pins are connected to it in total.In this case, there is 5.5Ohm resistance in the LED driving board.In order to optimize the efficiency of the supply voltage, it should be set to 5V.Total, there are 1 elements.
A6B259KA Features
Supplied from 5V
Resistance of 5.5Ohm
A6B259KA Applications
There are a lot of Allegro MicroSystems A6B259KA Power Switches ICs applications.
- Notebook and Tablet Computers
- Wearable Devices
- USB Protection
- Solid-State Drives
- PC Card Hot Swap
- Hot Swap
- Set-top-box
- Wireless/Networking Cards
- Set-Top Boxes
- USB Power Distribution
