A6B259KLWTR
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6B259 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 150mA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Inverting, Non-Inverting |
| Switch Type | Latched Driver |
| Family | 6B |
| Output Characteristics | OPEN-DRAIN |
| Output Polarity | TRUE |
| Ratio - Input:Output | 3:8 |
| Voltage - Load | 50V Max |
| Rds On (Typ) | 5.5 Ω |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
A6B259KLWTR Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 20-SOIC (0.295, 7.50mm Width).The LED driver is mounted as Surface Mount.There is a Latched Driver switch type associated with it.To ensure reliable operation, the temperature should be set to -40°C~125°C TA.There is a default setting of 8 for output.To operate, it needs a supply voltage of 4.5V~5.5V.There is a maximum output voltage of N-Channel volts.It comes under the family of A6B259.A total of 20 terminations have been recorded.It has 1 functions.The LED driver output is limited to 150mAV.As long as the supply voltage is 5V, high efficiency can be achieved.The LED driving board is equipped with a total of 20 pins.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).Normal operation requires a voltage above 4.5V for the supply voltage.
A6B259KLWTR Features
Supplied from 5V
A6B259KLWTR Applications
There are a lot of Allegro MicroSystems A6B259KLWTR Power Switches ICs applications.
- PC Cards
- USB Protection
- Portable Video Game Players
- USB Power Distribution
- Low Voltage I/O System Power
- Portable GPS Device
- Solid State Drivers
- Hot Swap
- Set-Top Boxes
- Storage (HDDs, SSDs)
