A6B273KA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Technology | NMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A6B273 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Strobe, Parallel |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 5.5 Ω |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 5.33mm |
| Length | 25.905mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6B273KA Overview
Tube is the way it's packaged.There is a 20-DIP (0.300, 7.62mm) package that includes it.Mounting type Through Hole is selected for the LED driving board.This switch is of type Latched Driver.It is best to set the temperature to -40°C~125°C TA to ensure reliable operation.The LED driver has a total of 8 outputs.With a supply voltage of 4.5V~5.5V, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.It is part of the A6B273 family of LED drivers.The termination count is 20.Currently, the lighting driver has a total of 8 functions.The maximum output current is reduced to 500mA to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.Through Hole is mounted in the way of this LED driving board.In total, it has 20 pins.It has 5.5Ohm resistance.A maximum supply voltage of 5.5V is set in Vsup.A normal operation requires that the supply voltage (Vsup) remain above 4.5V.
A6B273KA Features
Supplied from 5V
Resistance of 5.5Ohm
A6B273KA Applications
There are a lot of Allegro MicroSystems A6B273KA Power Switches ICs applications.
- Handheld Devices
- Smart Phones, Feature Phones
- Mobile Communication Devices
- Wearable Devices
- USB Power Distribution
- Hot-Swap Systems
- Hard Disk Drives
- Set-Top Boxes
- Low Voltage I/O System Power
- Notebook and Tablet Computers
