A6B273KLW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | TIN LEAD |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 8 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6B273 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5V |
| Interface | Strobe, Parallel |
| Nominal Supply Current | 300μA |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 5.5 Ω |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6B273KLW Overview
It is package in Tube case.Package 20-SOIC (0.295, 7.50mm Width) contains it.The lighting driver has the mounting type Surface Mount.The switch type is Latched Driver.It is best to set the temperature to -40°C~125°C TA to ensure reliable operation.The lighting driver has a total of 8 outputs that are available for use.Operation is based on a supply voltage of 4.5V~5.5V.A maximum voltage of N-Channel volts is available from the output of this LED driver.The A6B273 family consists of this type.It contains 20 terminations.The 20 pins are used for the operation of the system.As far as functions are concerned, the lighting driver has 8.The maximum output current drops to 500mA in order to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way of this LED driving board.A total of 20 pins are present on it.In this LED driving board, there is 5.5Ohm resistance.A supply voltage of 5V is recommended for maximum efficiency.
A6B273KLW Features
Supplied from 5V
Resistance of 5.5Ohm
A6B273KLW Applications
There are a lot of Allegro MicroSystems A6B273KLW Power Switches ICs applications.
- PC Card Hot Swap
- Gaming
- HDD, SSD
- Telecom and Network Systems
- Low Voltage I/O System Power
- Portable GPS
- Various applications equipped with buttons
- HDD and SSD
- Portable Devices
- PC Cards
