banner_page

A6B595KA

N-Channel 2.54mm PMIC A6B595 20 Pin 5V 18-DIP (0.300, 7.62mm)


  • Manufacturer: Allegro MicroSystems
  • Nocochips NO: 26-A6B595KA
  • Package: 18-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 832
  • Description: N-Channel 2.54mm PMIC A6B595 20 Pin 5V 18-DIP (0.300, 7.62mm) (Kg)

Details

Tags

Parameters
Voltage - Supply (Vcc/Vdd) 4.5V~5.5V
Propagation Delay 150 ns
Input Type Non-Inverting
Switch Type Latched Driver
Output Current per Channel 150mA
Ratio - Input:Output 1:8
Voltage - Load 50V Max
Output Peak Current Limit-Nom 0.5A
Rds On (Typ) 5.5 Ω
Built-in Protections TRANSIENT
Output Current Flow Direction SINK
Height Seated (Max) 5.33mm
Length 25.905mm
Width 7.62mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Through Hole
Mounting Type Through Hole
Package / Case 18-DIP (0.300, 7.62mm)
Number of Pins 20
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2000
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Resistance 5.5Ohm
Terminal Finish TIN LEAD
Technology NMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number A6B595
Pin Count 20
Number of Outputs 8
Qualification Status Not Qualified
Output Type N-Channel
Max Output Current 500mA
Operating Supply Voltage 5V
Number of Elements 1
Interface Strobe, Serial
Output Configuration Low Side

A6B595KA Overview


It is packaged in the manner of a Tube.There is a 18-DIP (0.300, 7.62mm) package that includes it.In this case, the LED driving board is mounted as Through Hole.Latched Driver is the type of switch owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There is a default setting of 8 for output.Operation is based on 4.5V~5.5V supply voltage.The maximum output voltage is N-Channel volts.This object belongs to the A6B595 family.It contains 20 terminations.The 20 pins are used to operate the LED driver.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 500mA.Using a voltage of 5V allows for high efficiency.It is mounted in the way of Through Hole.This LED driver is equipped with a total of 20 pins.5.5Ohm resistance is present in the lighting driver.A supply voltage of 5V is recommended for maximum efficiency.A total of 1 elements can be found.

A6B595KA Features


Supplied from 5V
Resistance of 5.5Ohm

A6B595KA Applications


There are a lot of Allegro MicroSystems A6B595KA Power Switches ICs applications.

  • PDAs
  • USB Power Distribution
  • Hot Swap
  • USB Power Distribution
  • Storage Drives
  • Solid State Drivers
  • Set-top-box
  • Wireless Modem Data Cards
  • Gaming
  • USB Protection

Write a review

Note: HTML is not translated!
    Bad           Good