A6B595KLW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6B595 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 5.5 Ω |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6B595KLW Overview
It is packaged in the manner of a Tube.The 20-SOIC (0.295, 7.50mm Width) package contains it.This lighting drivere has a mounting type of Surface Mount.The switch type is Latched Driver.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 8 outputs that are available for use.It uses a supply voltage of 4.5V~5.5V to operate.There is a maximum output voltage of N-Channel volts.This object belongs to the A6B595 family.It has a total of 20 terminations.In order to operate, 20 pins are used.As far as functions are concerned, the lighting driver has 1.The maximum output current drops to 500mA in order to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 20 pins.Lighting drivers with 5.5Ohm resistance are used.This results in a 150mA output current.A supply voltage of 5V is recommended for maximum efficiency.As a whole, there are 1 elements.
A6B595KLW Features
Supplied from 5V
Resistance of 5.5Ohm
A6B595KLW Applications
There are a lot of Allegro MicroSystems A6B595KLW Power Switches ICs applications.
- Handheld Devices
- Smartphone and PDA
- Portable GPS Device
- Hot Swap
- USB Power Distribution
- PC Card Hot Swap
- Solid State Drivers
- Hot Swap
- Various applications equipped with buttons
- PC Cards
