A6B595KLW-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | MATTE TIN |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A6B595 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Voltage | 50V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Output Current | 150mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Propagation Delay | 150 ns |
| Input Type | Non-Inverting |
| Max Output Voltage | 50V |
| Switch Type | Latched Driver |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 5.5 Ω |
| Built-in Protections | TRANSIENT |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A6B595KLW-T Overview
A Tube is used to package it.There is a package for it in the 20-SOIC (0.295, 7.50mm Width) package.In this case, the LED driving board is mounted as Surface Mount.Latched Driver is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has a total of 8 outputs.A voltage of 4.5V~5.5V is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of A6B595.As a result, there are 20 terminations.In order to operate, the 20 pins are used.It contains 1 functions.The maximum output current is reduced to 500mA to meet the operation criteria.Using a voltage of 5V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.This LED driver is equipped with a total of 20 pins.It has 5.5Ohm resistance.In this case, the output current will be set to 150mA.It is recommended to set the supply voltage to 5V for optimum efficiency.It is worth noting that there are a total of 1 elements.
A6B595KLW-T Features
Supplied from 5V
Resistance of 5.5Ohm
A6B595KLW-T Applications
There are a lot of Allegro MicroSystems A6B595KLW-T Power Switches ICs applications.
- USB Power Distribution
- Wireless Modem Data Cards
- Smartphone and PDA
- Handheld Devices
- Hot Swaps
- USB Power Distribution
- USB Ports/Hubs
- PC Card Hot Swap
- Portable/Handheld Devices
- Gaming
