A6B595KLWTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | TIN LEAD |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | A6B595 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Strobe, Serial |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Latched Driver |
| Output Current per Channel | 150mA |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 50V Max |
| Output Peak Current Limit-Nom | 0.5A |
| Rds On (Typ) | 5.5 Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
A6B595KLWTR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This file is included in package 20-SOIC (0.295, 7.50mm Width).The mounting type of the LED driver is Surface Mount.This switch is of type Latched Driver.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.It is possible to use 8 outputs in the lighting driver.The LED driving board operates with a supply voltage of 4.5V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.It is a member of the A6B595 family.As a result, there are 20 terminations.There are 1 functions of the LED driver.The maximum output current must drop to 500mA to meet the operation criteria.High efficiency is possible at 5V supply voltage.It is mounted in the way of Surface Mount.The LED driver has a total of 20 pins.There is 5.5Ohm resistance on the LED driver.A maximum supply voltage of 5.5V is set in Vsup.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.
A6B595KLWTR Features
Supplied from 5V
Resistance of 5.5Ohm
A6B595KLWTR Applications
There are a lot of Allegro MicroSystems A6B595KLWTR Power Switches ICs applications.
- Set-top-box
- Hard Disk Drives
- Hot Swap
- Portable GPS
- Solid-State Drives
- Solid State Drivers
- Set-Top Boxes
- Storage Drives
- Handheld Devices
- Gaming
