A6T-8102
| Parameters | |
|---|---|
| Contact Timing | MAKE-BEFORE-BREAK |
| Number of Switch Sections | 8 |
| PCB Hole Count | 16 |
| Contact Function | ON-OFF |
| Switch Action | LATCHED |
| Washable | Yes |
| Actuator Level | Flush, Recessed |
| Height | 4.2mm |
| Length | 0.837 21.26mm |
| Width | 6.2mm |
| Actuator Length | 0m |
| Height Above Board | 0.142 3.60mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Material | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | DIP |
| Weight | 790mg |
| Operating Temperature | -20°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| Series | A6T |
| JESD-609 Code | e4 |
| Feature | Tape Seal |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | PC Pins |
| ECCN Code | EAR99 |
| Number of Positions | 2 |
| Voltage - Rated | 24VDC |
| Additional Feature | WITH SEAL TAPE |
| Voltage - Rated DC | 24V |
| Pitch | 0.100 2.54mm Full |
| Orientation | Straight |
| Terminal Pitch | 2.54mm |
| Depth | 7.62mm |
| Current Rating | 25mA |
| Termination Style | PC Pin |
| Actuator Type | Slide (Standard) |
| Circuit | SPST |
| Contact Resistance | 200mOhm |
| Insulation Resistance | 100000000Ohm |
| Contact Current(DC)-Max | 0.025A |
| Max Current Rating | 25mA |
| Dielectric Withstanding Voltage | 500VAC V |
| Electrical Life | 1,000 Cycles |
| Number of Poles | 8 |
| Max Voltage Rating (DC) | 24V |
| Mechanical Life | 1,000 Cycles |
| Contact Current Rating | 25mA |
See Relate Datesheet
