Parameters |
Min Operating Temperature |
-55°C |
HTS Code |
8532.29.00.40 |
Capacitance |
56μF |
Voltage - Rated DC |
10V |
Packing Method |
TR, 7 INCH |
Depth |
4.3mm |
Case Code (Metric) |
7343 |
Case Code (Imperial) |
2917 |
Capacitor Type |
ALUMINUM ELECTROLYTIC CAPACITOR |
Lead Length |
1.3mm |
ESR (Equivalent Series Resistance) |
15mOhm |
Polarity |
POLARIZED |
Voltage |
10V |
Ripple Current |
4.1A |
Tan Delta |
0.06 |
Dissipation Factor |
6 % |
Current - Leakage |
22.4μA |
Height |
2.8mm |
Length |
7.3mm |
Width |
4.3mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Terminal Shape |
J BEND |
Dielectric Material |
Aluminium |
Published |
2011 |
Tolerance |
20% |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Number of Terminations |
2 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Max Operating Temperature |
125°C |
The capacitance can run at the range of 56μF.
20% are used to determine the tolerance of this capacitor. The type of the A700D566M010ATE015 capacitor KEMET A700D566M010ATE015 is suitable to conduct the ripple current at 4.1A. A700D566M010ATE015 Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 10V. There are 2 terminals embeded in A700D566M010ATE015 Capacitor. It has SMD/SMT terminations in total. The part is packaged by TR, 7 INCH. The voltage for the part is specified as 10V volts. The dielectric materials are defined as Aluminium. This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 125°C. The 2917 refer to case code (imperial). Case Code (Metric) includes 7343. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 56μF
Tolerance: 20%
There are great quantities of applications of A700D566M010ATE015 Aluminum Polymer Capacitors.
Typically, A700D566M010ATE015 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Motor Start
- To reduce power noise & signal noise
- DC Link
- Flashtube Ignition
- Decoupling Noise Filtering
- Lighting Ballast
- To enhance power efficiency
- Signal decoupling & power bypass
- Motor Control
- Server motherboards