A700V127M002ATE028
| Parameters | |
|---|---|
| Rated (DC) Voltage (URdc) | 2V |
| Ripple Current | 3.1A |
| Tan Delta | 0.06 |
| Dissipation Factor | 6 % |
| Current - Leakage | 14.4μA |
| Height | 2mm |
| Length | 7.3mm |
| Width | 4.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Surface Mount |
| Terminal Shape | J BEND |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| HTS Code | 8532.29.00.40 |
| Capacitance | 120μF |
| Voltage - Rated DC | 2V |
| Packing Method | TR, EMBOSSED PLASTIC, 7 INCH |
| Depth | 4.3mm |
| Case Code (Metric) | 7343 |
| Case Code (Imperial) | 2917 |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 28mOhm |
| Polarity | POLARIZED |
The capacitance can run at the range of 120μF.
20% are used to determine the tolerance of this capacitor. The type of the A700V127M002ATE028 capacitor KEMET A700V127M002ATE028 is suitable to conduct the ripple current at 3.1A. A700V127M002ATE028 Capacitor is mounted by Surface Mount. The typical values of Voltage - Rated DC are 2V. There are 2 terminals embeded in A700V127M002ATE028 Capacitor. It has SMD/SMT terminations in total. The part is packaged by TR, EMBOSSED PLASTIC, 7 INCH. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 125°C. The 2917 refer to case code (imperial). Case Code (Metric) includes 7343. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 120μF
Tolerance: 20%
There are great quantities of applications of A700V127M002ATE028 Aluminum Polymer Capacitors.
Typically, A700V127M002ATE028 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- DC Link
- Decoupling Noise Filtering
- Signal decoupling & power bypass
- PFC
- Power Factor Correction
- Lighting Ballast
- Power Line Buffering
- Server motherboards
- To enhance power efficiency
- DC Buffering
