A700X107M010AT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 2917 |
| Terminal Shape | J BEND |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Packaging | Tape & Reel (TR) |
| Tolerance | 20% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 10V |
| HTS Code | 8532.29.00.40 |
| Capacitance | 100μF |
| Packing Method | TR, 7/13 INCH |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| Polarity | POLARIZED |
| Leakage Current | 0.04mA |
| Ripple Current | 3400mA |
| Life (Hours) | 2000 hours |
| Tan Delta | 0.06 |
| ESR | 15 mΩ |
| Height Seated (Max) | 4.2926mm |
| Length | 7.2898mm |
| Width | 4.2926mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 100μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of 2917. This capacitor is accessible in the Tape & Reel (TR) packaging. The type of the A700X107M010AT capacitor KEMET A700X107M010AT is suitable to conduct the ripple current at 3400mA. A700X107M010AT Capacitor is mounted by Surface Mount. There are 2 terminals embeded in A700X107M010AT Capacitor. There are 0.04mA to protect the current flowing from the ground conductor to ground. Voltage - Rated often has values of 10V. The part is packaged by TR, 7/13 INCH. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 125°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 100μF
Tolerance: 20%
Package / Case: 2917
Packaging: Tape & Reel (TR)
There are great quantities of applications of A700X107M010AT Aluminum Polymer Capacitors.
Typically, A700X107M010AT is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Power Line Buffering
- DC Buffering
- Signal decoupling & power bypass
- Computer motherboards
- Flashtube Ignition
- Smoothing Noise Filtering
- To reduce power noise & signal noise
- Voltage Doubling
- Coupling or blocking
- PFC
