A80960CA-16

2.54mm 5V 32-bit Microprocessor 168-Pin 16MHz 5V

Manufacturer: Intel
Nocochips NO: 386-A80960CA-16
Package: -
Datasheet: PDF
Stock: 164
Description: 2.54mm 5V 32-bit Microprocessor 168-Pin 16MHz 5V (Kg)

Details

Tags

Parameters
Format	FIXED POINT
Integrated Cache	NO
RAM (words)	1000
Number of External Interrupts	9
On Chip Data RAM Width	8
Number of DMA Channels	4
Height Seated (Max)	4.57mm
Length	44.7mm
Width	44.7mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free
Mount	Through Hole
Number of Pins	168
Packaging	Bulk
Number of Terminations	168
ECCN Code	3A991.A.2
Max Operating Temperature	100°C
Min Operating Temperature	0°C
Additional Feature	OPERATING CASE TEMPERATURE 0 TO 100 C
HTS Code	8542.31.00.01
Subcategory	Microprocessors
Technology	MOS
Terminal Position	PERPENDICULAR
Terminal Form	PIN/PEG
Supply Voltage	5V
Terminal Pitch	2.54mm
Frequency	16MHz
Pin Count	168
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	OTHER
Voltage	5V
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
uPs/uCs/Peripheral ICs Type	MICROPROCESSOR, RISC
Supply Current-Max	550mA
Bit Size	32
Frequency (Max)	16MHz
Access Time	16 μs
Address Bus Width	32
Boundary Scan	NO
Low Power Mode	NO
External Data Bus Width	32

A80960CA-16 Overview

In order to provide high reliability, advanced packaging method Bulk is used. uPs/uCs/Peripheral ICs are a MICROPROCESSOR, RISC. Total terminations are 168. With a 5V voltage supply, the part should be turned on and run. There are 32 bits in its architecture. CPUs operate with a frequency of 16MHz Hz. Datasheets for 168 pin functions can be found here. A typical Microprocessors embedded microprocessor. Its external data bus width is 32. Using the microprocessor in an environment above 100°C is not recommended. 168 pins are injected into the part body. Many applications use this CPU with Through Hole mounted. A CPU operating at 16MHz frequency is expected. Micro processors can be used from 5V. As specified in datasheets, the embedded microprocessor requires 5V power supplies. It is 5V on the CPU's core. It is not possible to supply a voltage to the CPU higher than 550mA. The embedded microprocessor should not be supplied with a voltage higher than 5.5V. The lowest voltage that should be applied to the micro processor is 4.5V. This embedded microprocessor includes additional features such as: OPERATING CASE TEMPERATURE 0 TO 100 C. There are 9 external interrupt terminations due to hardware interrupts. DMA (Direct Memory Access) is programmed using 4 channels.