A80C186XL20
| Parameters | |
|---|---|
| Mount | Through Hole |
| Number of Pins | 68 |
| Packaging | Bulk |
| Number of Terminations | 68 |
| ECCN Code | 3A991.A.2 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS; NUMERIC COPROCESSOR INTERFACE |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | PERPENDICULAR |
| Terminal Form | PIN/PEG |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 20MHz |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR |
| Supply Current-Max | 90mA |
| Bit Size | 16 |
| Access Time | 20 μs |
| Address Bus Width | 20 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 16 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| Number of External Interrupts | 5 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 5.21mm |
| Length | 29.464mm |
| Width | 29.464mm |
| RoHS Status | RoHS Compliant |
A80C186XL20 Overview
High reliability is provided by the advanced packaging method Bulk. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROPROCESSOR. In total, there are 68 terminations. With a 5V voltage supply, the part should be turned on and run. It has a 16-Bit architecture. CPUs operate with a frequency of 20MHz Hz. Datasheets for 68 pin functions can be found here. As a typical Microprocessors, this cpu microprocessor has Microprocessors display. Its external data bus width is 16. If the temperature is higher than 70°C, the microprocessor should not operate. Embedded microprocessor bodies have 68 pins injected into them. This CPU is widely used in a variety of applications with its Through Hole mounting. From 5V, the micro processor can be used. According to the datasheet, the embedded microprocessor requires 5V power supply. 5V is the voltage on the CPU core. 90mA voltage higher than 90mA can be supplied to the CPU. Users should not supply a microprocessor with more voltage than 5.5V under normalcircumstances. Micro processors should be supplied with 4.5V as their lowest voltage. The embedded microprocessor also has the following additional features: DRAM REFRESH CONTROLLER; 3 PROGRAMMABLE TIMERS; NUMERIC COPROCESSOR INTERFACE. To deal with hardware interrupts, there are 5 external interrupt terminations. To program DMA (Direct Memory Access), 2 channels are used.
A80C186XL20 Features
16-Bit Structure
A80C186XL20 Applications
There are a lot of Intel A80C186XL20 Microprocessor applications.
- Digital TVs
- Oil and gas
- Measurement and control field
- Routers
- Robotic prosthetic limbs
- Microwave ovens
- Virtual reality VR robots
- Medical instruments
- Industrial instrumentation devices
- Xbox
