A8430EEKTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-WDFN Exposed Pad |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | MATTE TIN |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | unknown |
| Frequency | 1.2MHz |
| Base Part Number | A8430 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 10V |
| Output Current | 20mA |
| Voltage - Output | 36V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 20mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 2.5V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A8430EEKTR-T Overview
The 5-WDFN Exposed Pad package conserves board space. A LED driver using this design has 1 outputs.We are using Surface Mount as the mounting method.With high reliability and efficiency, this emerges as a DC DC Regulator.-40°C~85°C TA is a valid operating temperature for the led driver.Backlight has considerable advantages.A frequency of 1.2MHz is used as the basis for operation.5 terminations are designed for its operation.In this LED driver, the base is configured as 5.It is possible for undetermined failures to occur if the voltage supply is lower than 2.5V.A total of 1 segments have been created.As you can see, it is mounted by Surface Mount.A8430 is the base part number for this LED driver.An acceptable maximum value for the supply voltage is 10V.The device has a voltage output of 36V volts.The device has 5 pins.20mA is the maximum amount of current that can be supplied to the load.
A8430EEKTR-T Features
Available in the 5-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.2MHz
Supply voltage of 3V
A8430EEKTR-T Applications
There are a lot of Allegro MicroSystems A8430EEKTR-T LED Driver ICs applications.
- Refrigeration lighting
- Stage Lighting and Signage
- Down lights
- Auxiliary lights for on-vehicle cameras
- Stage and Studio lighting
- Medical surgery lighting
- Linear fluorescent
- OLED power supply for portable equipment
- Amusement Machines
- Panel lighting
