A8434EESTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Camera Flash |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A8434 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Output Voltage | 6V |
| Operating Supply Voltage | 5.5V |
| Output Current | 30mA |
| Topology | Switched Capacitor (Charge Pump) |
| Current - Output / Channel | 30mA |
| Internal Switch(s) | Yes |
| Dimming | Multi-Step |
| Number of Segments | 6 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A8434EESTR-T Overview
Additionally, there is a 16-WFQFN Exposed Pad package for saving space.6 outputs are designed into LED drivers.It is possible to mount the led driver using Surface Mount.The system emerges as a DC DC Regulator with high efficiency.When the temperature is -40°C~85°C TA, it can work normally.The benefits of Backlight, Camera Flash are considerable.1MHz is the frequency in which it operates.In this case, it uses 16 terminations.It has a base of 16 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 2.7V.We estimate that there are 6 segments.It has been mounted on Surface Mount.A base part number of A8434 is associated with this LED driver.In addition, it has 16 pins.Further, its characteristics allow it to be classified as Display Drivers.You can supply 30mA current to the load.The internal voltages needed to power systems is 5.5V.The voltage at the output terminal is 6V.
A8434EESTR-T Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Supply voltage of 3.6V
Operating with the supply voltage of 5.5V
Output voltage of 6V
A8434EESTR-T Applications
There are a lot of Allegro MicroSystems A8434EESTR-T LED Driver ICs applications.
- Gallery lighting
- Linear fluorescent
- Architectural lighting
- Stage and Studio lighting
- Down lights
- Panel lighting
- Scanners and Handy Terminals
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General lighting
- Museum lighting
