A8500EECTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 26-WFQFN Exposed Pad |
| Number of Pins | 26 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 26 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Frequency | 2MHz |
| Base Part Number | A8500 |
| Pin Count | 26 |
| Number of Outputs | 8 |
| Output Voltage | 28V |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.2V |
| Topology | Step-Up (Boost) |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| fmax-Min | 2.2 MHz |
| Dimming | Analog, Multi-Step, PWM |
| Number of Segments | 96 |
| Voltage - Supply (Min) | 4.2V |
| Multiplexed Display Capability | NO |
| Display Mode | DOT MATRIX |
| Data Input Mode | SERIAL |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A8500EECTR-T Overview
On the board, there is also a 26-WFQFN Exposed Pad package that saves space.LED drivers are designed with 8 outputs.The mounting method adopted is Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Backlight has many advantages.It operates at 2MHz frequency.The operation of this system is supported by 26 terminations.This module has 26 pins as its base.If the voltage supply is less than 4.2V, undetermined failures will occur.The number of segments is estimated to be 96.It has been mounted on Surface Mount.A8500 is the base part number for the LED driver.It is acceptable for the voltage to be 5.5V.On it, there are 26 pins.Moreover, it can be classified as Display Drivers due to its characteristics.The system works with a minimum supply voltage of 4.2V in order to achieve maximum efficiency.It is necessary to use 5V voltage to power systems.There is 28V voltage at the output terminal.
A8500EECTR-T Features
Available in the 26-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 5V
Operating with the supply voltage of 5V
Output voltage of 28V
A8500EECTR-T Applications
There are a lot of Allegro MicroSystems A8500EECTR-T LED Driver ICs applications.
- OLED power supply for portable equipment
- Linear fluorescent
- Scanners and Handy Terminals
- Industrial LED Lighting: Image Recognition Devices
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- LED Lightings for Industrial Equipment
- Down lights
- High-end retail lighting
- Refrigeration lighting
