A8513KLYTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | A8513 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 4.5V |
| Output Current | 150mA |
| Topology | SEPIC, Step-Up (Boost) |
| Output Current per Channel | 150mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 14 |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
A8513KLYTR-T Overview
The board's 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package saves space. In this LED driver, there are 1 outputs.Mounting is done according to the Surface Mount method.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.-40°C~125°C TA is the operating temperature of the led driver.Automotive, Backlight has significant advantages.This system operates at 2MHz frequency.In this case, the termination value is 10.It is configured with 16 pins as its base.It is possible that failures will occur if the voltage supply is below 4.5V.It is estimated that there are 14 segments.The mount is in the way of Surface Mount.This LED driver can be found under the base part number A8513.The supply voltage of 40V is an acceptable maximum value.Additionally, it is categorized into Display Drivers according to its characteristics.To meet high efficiency standards, it works with a voltage of 4.5V.In this case, the load can only be supplied with 150mA current.LED drivers from the Automotive, AEC-Q100 series are essential components for a wide variety of products.
A8513KLYTR-T Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 2MHz
Supply voltage of 16V
A8513KLYTR-T Applications
There are a lot of Allegro MicroSystems A8513KLYTR-T LED Driver ICs applications.
- Medical surgery lighting
- Scanners and Handy Terminals
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage and Studio lighting
- Auxiliary lights for on-vehicle cameras
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- General lighting
- Linear fluorescent
- Street lighting
