A8517KLPTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Frequency | 400kHz~2.3MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | A8517 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Power Supplies | 16V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 15mA |
| Output Current | 60mA |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 60mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | PWM |
| Number of Segments | 9 |
| Max Junction Temperature (Tj) | 150°C |
| Switching Frequency | 2MHz |
| Voltage - Supply (Min) | 4.5V |
| Multiplexed Display Capability | NO |
| Ambient Temperature Range High | 125°C |
| Data Input Mode | SERIAL |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
A8517KLPTR-T Overview
Board space is saved by its 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package.LED drivers with this design have 10 outputs.As far as mounting is concerned, Surface Mount is adopted.The system emerges as a DC DC Regulator with high efficiency.This LED driver can be operated at a temperature of -40°C~125°C TA. Automotive has many benefits.The frequency of 400kHz~2.3MHz is used as the basis for its operation.28 terminations are designed for its operation.The base is configured with 28 pins.Undetermined failures may occur if the voltage supply falls below 4.5V.There are estimated to be 9 segments.There is a mounting of it by Surface Mount.There is a base part number A8517 for this LED driver.The supply voltage of 36V is an acceptable maximum value.Further, it can be classified as Display Drivers based on its characteristics.For highest efficiency, it works with a minimal supply voltage of 4.5V.Loads can only be powered by 60mA current.This electronic component can fully perform when the switching frequency is 2MHz.A component of the Automotive, AEC-Q100 series, this LED driver is widely used in a variety of applications.
A8517KLPTR-T Features
Available in the 28-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 400kHz~2.3MHz
Supply voltage of 16V
Switching frequency of 2MHz
A8517KLPTR-T Applications
There are a lot of Allegro MicroSystems A8517KLPTR-T LED Driver ICs applications.
- High-end retail lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Auxiliary lights for on-vehicle cameras
- Dimmable LED for vehicle interiors
- Scanners and Handy Terminals
- Museum lighting
- Street lighting
- OLED power supply for portable equipment
- Architectural lighting
- Constant Voltage Power Source for portable equipment
