A8518KLPTR-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 16V |
| Terminal Pitch | 0.65mm |
| Frequency | 2.15MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 2 |
| Max Supply Voltage | 40V |
| Output Current | 400mA |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 40V |
| Output Current per Channel | 200mA |
| Internal Switch(s) | Yes |
| fmax-Min | 1 MHz |
| Dimming | Analog, PWM |
| Number of Segments | 4 |
| Switching Frequency | 2.15MHz |
| Multiplexed Display Capability | NO |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
A8518KLPTR-T Overview
16-TSSOP (0.173, 4.40mm Width) Exposed Pad saves board space. LED drivers are designed with 2 outputs.Surface Mount is used to mount the led light driver.With high efficiency, it emerges as a DC DC Regulator.The led light driver operates normally at -40°C~125°C TA. A number of benefits are available to Backlight.2.15MHz is the frequency in which it operates.There are 16 terminations that are designed to operate with it.Its configuration is based on 16 pins.In total, it includes 4 segments.There is a mounting of it by Surface Mount.There is no maximum value acceptable for the supply voltage, so 40V is acceptable.This device requires a minimum voltage of 4.5V volts.When the maximum supply current is allowed, it reaches 40V.400mA is the maximum amount of current that can be supplied to the load.Electronic components can function properly when their switching frequency is set to 2.15MHz.An LED driver belonging to the Automotive, AEC-Q100 series is an essential component in a wide range of applications.
A8518KLPTR-T Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 2.15MHz
Supply voltage of 16V
Switching frequency of 2.15MHz
A8518KLPTR-T Applications
There are a lot of Allegro MicroSystems A8518KLPTR-T LED Driver ICs applications.
- Scanners and Handy Terminals
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- A- lamps
- Architectural lighting
- White LED Backlight for portable equipment
- General lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lighting PFCs, Linear Dimmable
- Down lights
- Dimmable LED for vehicle interiors
