AAHS298BS-S20B-S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tray |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 45V |
| Terminal Pitch | 1.27mm |
| JESD-30 Code | R-CDSO-G20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 50V |
| Power Supplies | 10/50V |
| Supply Voltage-Min (Vsup) | 10V |
| Interface | Parallel |
| Current - Output (Max) | 2.8A |
| Output Configuration | High Side |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~50V |
| Driver Number of Bits | 8 |
| Fault Protection | Over Temperature |
| Height Seated (Max) | 2.92mm |
| Length | 12.765mm |
| Width | 7.43mm |
| RoHS Status | RoHS Compliant |
AAHS298BS-S20B-S Overview
Tray is the way it's packaged.It is included with the 20-SOIC (0.295, 7.50mm Width) package as well.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.To ensure reliable operation, set the temperature to -55°C~125°C TA.The lighting driver has a total of 8 outputs that are available for use.A maximum output voltage of P-Channel volts can be achieved by this LED driver.The termination count is 20.It consists of 1 functions.In this case, the LED driving board can produce only 2.8AV as its maximum output.A supply voltage of 45V leads to high efficiency.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The maximum supply voltage for this lighting driver is set to 50V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 10V.This part is powered by 10/50V.
AAHS298BS-S20B-S Features
Supplied from 45V
AAHS298BS-S20B-S Applications
There are a lot of Microsemi Corporation AAHS298BS-S20B-S Power Switches ICs applications.
- USB3.1 Power Delivery
- Mobile Communication Devices
- HDD, SSD
- Hot Swap
- Hard Disk Drives
- Handheld Devices
- Hot Swap
- Various applications equipped with buttons
- Gaming
- Portable Devices
