AAT3190ITP-T1

0.5mm PMIC 12 Pin 5V 12-TFSOJ (0.094, 2.40mm Width)

Manufacturer: Skyworks Solutions Inc.
Nocochips NO: 726-AAT3190ITP-T1
Package: 12-TFSOJ (0.094, 2.40mm Width)
Datasheet: PDF
Stock: 276
Description: 0.5mm PMIC 12 Pin 5V 12-TFSOJ (0.094, 2.40mm Width) (Kg)

Details

Tags

Parameters
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	12-TFSOJ (0.094, 2.40mm Width)
Number of Pins	12
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
Published	2012
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	12
Type	DC DC Controller
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	J BEND
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.5mm
Number of Outputs	2
Max Supply Voltage	5.5V
Output Current	30mA
Voltage - Output	±25V
Topology	Switched Capacitor (Charge Pump)
Control Mode	VOLTAGE-MODE
Internal Switch(s)	No
Switching Frequency	1MHz
Voltage - Supply (Min)	2.7V
Height Seated (Max)	1.1mm
Length	3mm
RoHS Status	ROHS3 Compliant

AAT3190ITP-T1 Overview

There is a 12-TFSOJ (0.094, 2.40mm Width) package on the board that is used to save space. Typically, LED drivers have 2 outputs.The led driver mounting is done by using Surface Mount.When it emerges as a DC DC Controller, it performs extremely well and is highly reliable.-40°C~85°C TA is a valid operating temperature for the led driver.There are 12 terminations that are designed to operate with it.The base of this board is configured as 12 pins.Undetermined failures can occur if the voltage supply is below 2.7V.I have mounted it by Surface Mount.5.5V is a reasonable voltage.There is ±25V voltage output from the device.As a result, its characteristics can also be categorized as Switching Regulator or Controllers.It is possible to supply the load with 30mA current.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.