AAT4280AIJS-2-T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TFSOJ (0.069, 1.75mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | ASPM™ |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 120mOhm |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 714mW |
| Terminal Position | DUAL |
| Terminal Form | J BEND |
| Terminal Pitch | 0.5mm |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.3A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Power Dissipation | 714mW |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 1.5V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.5V~5.5V |
| Rds On (Typ) | 80m Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT4280AIJS-2-T1 Overview
Tape & Reel (TR) is how it's packaged.It's included in the 8-TFSOJ (0.069, 1.75mm Width) package.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.There are 1 outputs available on this lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Load Discharge, Slew Rate Controlled.It has a total of 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.It is necessary to reduce the maximum output current to 2.3A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.In this LED driving board, there is 120mOhm resistance.It is included in the ASPM? series.As a result, the output current is set to 2.3A.Self-contained in an econtainer with a capacity of Power Management Circuits, this LED driver is self-contained.It uses an analog IC, which is SPST.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.A maximum input voltage of 5.5V volts can be applied to it.The minimum input voltage is 1.5V volts.It requires 1μA current to operate.
AAT4280AIJS-2-T1 Features
Resistance of 120mOhm
AAT4280AIJS-2-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4280AIJS-2-T1 Power Switches ICs applications.
- Hard Disk Drives
- Wireless Headsets
- Wearable Devices
- Wireless/Networking Cards
- Telecom and Network Systems
- Hot Swap
- Set-Top Boxes
- Storage (HDDs, SSDs)
- PC Cards
- Notebook and Tablet Computers
