Parameters |
Mounting Type |
Surface Mount |
Package / Case |
8-TFSOJ (0.069, 1.75mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Published |
2010 |
Series |
ASPM™ |
Feature |
Load Discharge, Slew Rate Controlled |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
120mOhm |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
714mW |
Terminal Position |
DUAL |
Terminal Form |
J BEND |
Terminal Pitch |
0.5mm |
Reach Compliance Code |
unknown |
Current Rating |
2.3A |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Output Type |
P-Channel |
Max Output Current |
2.3A |
Operating Supply Voltage |
5.5V |
Interface |
On/Off |
Analog IC - Other Type |
SPST |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
1μA |
Input Type |
Non-Inverting |
Turn On Delay Time |
150 μs |
Switch Type |
General Purpose |
Min Input Voltage |
1.5V |
Max Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.5V~5.5V |
Rds On (Typ) |
80m Ω |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
AAT4280AIJS-3-T1 Overview
As you can see, it's packaged in the way of a Cut Tape (CT).This file is included in package 8-TFSOJ (0.069, 1.75mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.A supply voltage of Not Required is required for it to operate.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The lighting driver has Load Discharge, Slew Rate Controlled features.A total of 8 terminations can be found in it.In order to operate, the 8 pins are used.The maximum output current is reduced to 2.3A to meet the operation criteria.Currently, the LED driving board has 120mOhm resistance.This electrical component is part of the ASPM? series.Self-contained in an econtainer with a capacity of Power Management Circuits, this LED driver is self-contained.There is an analog input IC in this gadget, which is SPST.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.A voltage of 1.5V volts is the minimum input voltage.For its operation, a maximum current requirement of 1μA is required.
AAT4280AIJS-3-T1 Features
Resistance of 120mOhm
AAT4280AIJS-3-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4280AIJS-3-T1 Power Switches ICs applications.
- USB Power Distribution
- Hot-Swap Systems
- Telecom and Network Systems
- Notebook and Tablet Computers
- Portable Devices
- USB Power Distribution
- PC Cards
- HDD and SSD
- Set-top-box
- Handheld Devices