AAT4290IJS-1-T1

P-Channel PMIC ASPM? Series 8 Pin 8-TFSOJ (0.069, 1.75mm Width)

Manufacturer: Skyworks Solutions Inc.
Nocochips NO: 726-AAT4290IJS-1-T1
Package: 8-TFSOJ (0.069, 1.75mm Width)
Datasheet: PDF
Stock: 598
Description: P-Channel PMIC ASPM? Series 8 Pin 8-TFSOJ (0.069, 1.75mm Width) (Kg)

Details

Tags

Parameters
Mounting Type	Surface Mount
Package / Case	8-TFSOJ (0.069, 1.75mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
Published	2005
Series	ASPM™
Feature	Slew Rate Controlled
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Reach Compliance Code	unknown
Number of Outputs	5
Output Type	P-Channel
Max Output Current	250mA
Operating Supply Voltage	5.5V
Interface	S²Cwire™
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Switch Type	General Purpose
Min Input Voltage	1.8V
Max Input Voltage	5.5V
Ratio - Input:Output	1:5
Voltage - Load	1.8V~5.5V
Fault Protection	UVLO
Rds On (Typ)	1.1 Ω
RoHS Status	ROHS3 Compliant

AAT4290IJS-1-T1 Overview

Cut Tape (CT) is the way it's packaged.It is included in the package 8-TFSOJ (0.069, 1.75mm Width).The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.It is possible to use 5 outputs in the lighting driver.The LED driving board operates at Not Required volts.It has a maximum output voltage of P-Channel volts.A lighting driver with Slew Rate Controlled features is available.8 pins are used for operation.The maximum output current must drop to 250mA to meet the operation criteria.A component of this type is included in the ASPM? series.It is recommended to set the supply voltage to 5.5V for optimum efficiency.The maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 1.8V volts.