AAT4610AIGV-1-T1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | ASPM™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Min (Vsup) | 2.4V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Nominal Supply Current | 15μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Input Current | 15μA |
| Switch-on Time-Max | 200000ns |
| Rds On (Typ) | 145m Ω |
| RoHS Status | ROHS3 Compliant |
AAT4610AIGV-1-T1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package SC-74A, SOT-753.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.Keeping the temperature at -40°C~85°C TA ensures reliable operation.As a default, the output is set to 1.Operation is based on a supply voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.It contains 5 terminations.The operation is carried out using the 5 pins.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 2A in order to meet the operation requirements.High efficiency is possible when the supply voltage is set to 5V.It is part of the ASPM? series.A self-contained LED driver with a capacity of Power Management Circuits is contained in an econtainer.In order to operate normally, the supply voltage (Vsup) must be maintained above 2.4V.In this case, a digital IC is used, which is SPST.In total, there are 1 channels available.
AAT4610AIGV-1-T1 Features
Supplied from 5V
1 channels
AAT4610AIGV-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4610AIGV-1-T1 Power Switches ICs applications.
- Gaming
- USB Power Distribution
- Low Voltage I/O System Power
- Wireless Modem Data Cards
- USB Protection
- Set-top-box
- Handheld Devices
- Portable GPS
- Smart Phones, Feature Phones
- PDAs
