AAT4610BIGV-1-T1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2008 |
| Series | ASPM™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 230mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 9μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.4V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 12 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.6A |
| Rds On (Typ) | 145m Ω |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT4610BIGV-1-T1 Overview
The package is in the form of a Cut Tape (CT).The SC-74A, SOT-753 package includes it.A Surface Mount mounting is used for the LED driving board.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has 1 outputs.The LED driving board operates at Not Required volts.The maximum output voltage is P-Channel volts.A total of 5 terminations can be found in it.The 5 pins are used to operate the LED driver.The LED driving board has a total of 1 functions.This results in the maximum output current dropping to 2A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 5V.Surface Mount is mounted in the way of this lighting driver.230mOhm is the resistance of the lighting driver.These electrical components are part of the ASPM? series.As a result, the output current is set to 2A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.A 5V power supply is used by the part.Optimal efficiency requires a voltage of 5.5V.As far as input voltage goes, its maximum is 5.5V volts.As far as input voltage goes, it has a minimum of 2.4V volts.This system has a maximum current requirement of 9μA.
AAT4610BIGV-1-T1 Features
Supplied from 5V
Resistance of 230mOhm
AAT4610BIGV-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4610BIGV-1-T1 Power Switches ICs applications.
- USB Ports/Hubs
- Portable Devices
- Gaming
- Hot Swap
- Mobile Communication Devices
- Portable Music Players
- USB3.1 Power Delivery
- Telecom and Network Systems
- USB Power Distribution
- Hard Disk Drives
