AAT4610BIGV-T1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | unknown |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 1.2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.4V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Turn On Time | 200 μs |
| Output Peak Current Limit-Nom | 1.6A |
| Rds On (Typ) | 145m Ω |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 2.85mm |
| RoHS Status | ROHS3 Compliant |
AAT4610BIGV-T1 Overview
It is package in Tape & Reel (TR) case.In the SC-74A, SOT-753 package, it is included.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of P-Channel volts on this LED driver.A total of 5 terminations have been found in it.It is important to note that the LED driving board has 1 functions.The maximum output current is reduced to 1.2A to meet the operation criteria.The supply voltage can be 5V for high efficiency.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The power supply of the part is 5V.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.Input voltage is limited to 5.5V volts.There is a minimum input voltage of 2.4V volts.
AAT4610BIGV-T1 Features
Supplied from 5V
AAT4610BIGV-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4610BIGV-T1 Power Switches ICs applications.
- Portable GPS Device
- USB Ports/Hubs
- Wireless Headsets
- Smartphone and PDA
- Portable Music Players
- Gaming
- USB3.1 Power Delivery
- Solid State Drivers
- Hot Swap
- PDAs
