AAT4610BIJS-T1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TFSOJ (0.069, 1.75mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2012 |
| Series | ASPM™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | J BEND |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.4V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Turn On Time | 200 μs |
| Output Peak Current Limit-Nom | 1.6A |
| Rds On (Typ) | 145m Ω |
| Built-in Protections | TRANSIENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
AAT4610BIJS-T1 Overview
It is package in Cut Tape (CT) case.It is included with the 8-TFSOJ (0.069, 1.75mm Width) package as well.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.Voltage output is P-Channel volts at maximum.The termination count is 8.The operation is carried out using the 8 pins.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 2A to meet the operation criteria.Supply voltages of 5V allow for high efficiency.These electrical components are part of the ASPM? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.It has a power supply of 5V.In order to maximize efficiency, the supply voltage should be set at 5.5V.It has a maximum input voltage of 5.5V volts.It requires 2.4V volts as the minimum input voltage.
AAT4610BIJS-T1 Features
Supplied from 5V
AAT4610BIJS-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4610BIJS-T1 Power Switches ICs applications.
- PC Cards
- PDAs
- USB Ports/Hubs
- Hot-Swap Systems
- Portable/Handheld Devices
- USB3.1 Power Delivery
- HDD, SSD
- Notebook and Tablet Computers
- Wireless Headsets
- Portable GPS Device
