AAT4616AIPU-1-T1
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 230mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.18W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-N6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 130m Ω |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Surface Mount | YES |
AAT4616AIPU-1-T1 Overview
Tape & Reel (TR) is how it's packaged.This file is included in package 6-VDFN Exposed Pad.In this case, the LED driving board is mounted as Surface Mount.There is a General Purpose switch type associated with it.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of P-Channel volts.This LED driving board is equipped with Status Flag features in order for it to be useful.It consists of 6 terminations in total.In order to meet the operation criteria, the maximum output current drops to 2A.Using a voltage of 5V allows for high efficiency.Currently, the LED driving board has 230mOhm resistance.In this case, the output current is set to 2A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.A 5V power supply is used by the part.It is recommended to set the supply voltage to 5.5V for optimum efficiency.A maximum current requirement of 10μA is required for its operation.
AAT4616AIPU-1-T1 Features
Supplied from 5V
Resistance of 230mOhm
AAT4616AIPU-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4616AIPU-1-T1 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Storage Drives
- Hot Swap
- PC Cards
- HDD, SSD
- Wireless/Networking Cards
- PDAs
- USB Power Distribution
- USB Ports/Hubs
- Wearable Devices
