AAT4616AIPU-T1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-VDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 230mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.18W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Current Rating | 2A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-N6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 130m Ω |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT4616AIPU-T1 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).It's included in the 6-VDFN Exposed Pad package.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.It produces a maximum output voltage of P-Channel volts at its maximum output.Currently, the LED driving board is equipped with Status Flag features.A total of 6 terminations have been found in it.The maximum output current is reduced to 2A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 5V.Currently, the LED driving board has a resistance of 230mOhm ohms.This results in a 2A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this part, the power supply is set to 5V.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.This system has a maximum current requirement of 10μA.
AAT4616AIPU-T1 Features
Supplied from 5V
Resistance of 230mOhm
AAT4616AIPU-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4616AIPU-T1 Power Switches ICs applications.
- USB Power Distribution
- Hot Swaps
- Wireless Modem Data Cards
- Smartphone and PDA
- Set-Top Boxes
- Wireless/Networking Cards
- PDAs
- Solid-State Drives
- Wireless Headsets
- Gaming
