AAT4616IGV-1-T1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Feature | Status Flag |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 130mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 450mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Current Rating | 1.6A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Rds On (Typ) | 130m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.85mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AAT4616IGV-1-T1 Overview
A Tape & Reel (TR) is used to package it.It's included in the SC-74A, SOT-753 package.Surface Mount is the mounting type of the LED driver.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.Voltage output is P-Channel volts at maximum.It has a total of Status Flag features.In total, there are 5 terminations.It has 1 functions.This results in the maximum output current dropping to 2A to meet the operation criteria.A supply voltage of 5V leads to high efficiency.Currently, the LED driving board has a resistance of 130mOhm ohms.The output current is set to 2A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The power supply of the part is 5V.For maximum efficiency, the supply voltage should be set to 5.5V.For its operation, a maximum current requirement of 10μA is required.
AAT4616IGV-1-T1 Features
Supplied from 5V
Resistance of 130mOhm
AAT4616IGV-1-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4616IGV-1-T1 Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Notebook and Tablet Computers
- USB Protection
- USB Power Distribution
- Portable Video Game Players
- Portable GPS Device
- Solid State Drivers
- Gaming
- Set-Top Boxes
- USB Ports/Hubs
