AAT4616IGV-T1
| Parameters | |
|---|---|
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Rds On (Typ) | 130m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 2.85mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 230mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 450mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
AAT4616IGV-T1 Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the SC-74A, SOT-753 package.This LED driving board is mounted using the mounting type Surface Mount.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is P-Channel volts.Status Flag features are available on the lighting driver.In total, there are 5 terminations.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2A.With a supply voltage of 5V, high efficiency is possible.It has a resistance of 230mOhm.The output current is set to 2A in this case.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This part's power supply is 5V.In order to maximize efficiency, the supply voltage should be set at 5.5V.It operates at a maximum current of 10μA.
AAT4616IGV-T1 Features
Supplied from 5V
Resistance of 230mOhm
AAT4616IGV-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4616IGV-T1 Power Switches ICs applications.
- Notebook PC
- PDAs
- USB3.1 Power Delivery
- Various applications equipped with buttons
- HDD, SSD
- Smart Phones, Feature Phones
- Set-Top Boxes
- Gaming
- Hard Disk Drives
- Wireless Headsets
