banner_page

AAT4616IPS-1-T1

5V P-Channel 0.45mm PMIC 5V 8-VFDFN Exposed Pad


  • Manufacturer: Skyworks Solutions Inc.
  • Nocochips NO: 726-AAT4616IPS-1-T1
  • Package: 8-VFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 732
  • Description: 5V P-Channel 0.45mm PMIC 5V 8-VFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-VFDFN Exposed Pad
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2006
Feature Status Flag
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Resistance 230mOhm
Subcategory Peripheral Drivers
Max Power Dissipation 1.35W
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.45mm
Current Rating 1.6A
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
JESD-30 Code S-PDSO-N8
Number of Outputs 1
Qualification Status Not Qualified
Output Type P-Channel
Max Output Current 2A
Operating Supply Voltage 5.5V
Power Supplies 5V
Interface On/Off
Output Configuration High Side
Output Current 2A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 10μA
Input Type Non-Inverting
Turn On Delay Time 7 μs
Switch Type General Purpose
Turn-Off Delay Time 10 μs
Ratio - Input:Output 1:1
Voltage - Load 2.4V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO
Output Peak Current Limit-Nom 0.75A
Rds On (Typ) 130m Ω
Built-in Protections OVER CURRENT; THERMAL; UNDER VOLTAGE
Height Seated (Max) 0.85mm
Length 2mm
Width 2mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

AAT4616IPS-1-T1 Overview


It's?packaged?in?the way?of?a?Tape & Reel (TR).It is included with the 8-VFDFN Exposed Pad package as well.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.Features of the lighting driver are Status Flag.There are 8 terminations in it.It contains 1 functions.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.230mOhm resistance is present in the lighting driver.As a result, the output current is set to 2A.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This part has a power supply of 5V volts.The supply voltage should be set at 5.5V for best efficiency.It operates at a maximum current of 10μA.

AAT4616IPS-1-T1 Features


Supplied from 5V
Resistance of 230mOhm

AAT4616IPS-1-T1 Applications


There are a lot of Skyworks Solutions Inc. AAT4616IPS-1-T1 Power Switches ICs applications.

  • Low Voltage I/O System Power
  • Hot-Swap Systems
  • PC Card Hot Swap
  • Hard Disk Drives
  • Hot Swaps
  • Wireless/Networking Cards
  • Wearable Devices
  • Storage (HDDs, SSDs)
  • Portable/Handheld Devices
  • Portable GPS Device

Write a review

Note: HTML is not translated!
    Bad           Good