AAT4616IPS-T1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 230mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.35W |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.45mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | S-PDSO-N8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 7 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 10 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.4V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Reverse Current, UVLO |
| Output Peak Current Limit-Nom | 0.75A |
| Rds On (Typ) | 130m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 0.85mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
AAT4616IPS-T1 Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 8-VFDFN Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is P-Channel volts.The lighting driver has Status Flag features.It consists of 8 terminations in total.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 2A.The supply voltage can be 5V for high efficiency.There is 230mOhm resistance on the LED driver.When this is the case, the output current is set to 2A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this part, the power supply is set to 5V.In order to maximize efficiency, the supply voltage should be set to 5.5V.The maximum current required for its operation is 10μA.
AAT4616IPS-T1 Features
Supplied from 5V
Resistance of 230mOhm
AAT4616IPS-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4616IPS-T1 Power Switches ICs applications.
- Handheld Devices
- Wireless Headsets
- Storage (HDDs, SSDs)
- Solid State Drivers
- Smartphone and PDA
- PC Cards
- Portable GPS
- PDAs
- Set-Top Boxes
- USB Ports/Hubs
