Parameters |
Factory Lead Time |
1 Week |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
Feature |
Slew Rate Controlled, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Resistance |
100MOhm |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Reach Compliance Code |
unknown |
Current Rating |
2A |
Pin Count |
8 |
JESD-30 Code |
S-PDSO-G8 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
2A |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
2.7V |
Interface |
On/Off |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Switch Type |
USB Switch |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Output Peak Current Limit-Nom |
1.5A |
Rds On (Typ) |
60m Ω |
Turn Off Time |
20 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SOURCE |
Length |
3mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
AAT4625IKS-T1 Overview
Tape & Reel (TR) is the way it's packaged.This package is included in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).There is a switch type of USB Switch.Keeping the temperature at -40°C~85°C TA ensures reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on a supply voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.In total, there are 8 terminations.It contains 1 functions.To meet the operation criteria, the maximum output current drops to 2A.Using a voltage of 5V allows for high efficiency.This LED driver is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 100MOhm ohms.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).Normal operation requires a voltage above 2.7V for the supply voltage.
AAT4625IKS-T1 Features
Supplied from 5V
Resistance of 100MOhm
AAT4625IKS-T1 Applications
There are a lot of Skyworks Solutions Inc. AAT4625IKS-T1 Power Switches ICs applications.
- HDD, SSD
- Hot Swap
- USB Power Distribution
- USB3.1 Power Delivery
- Smartphone and PDA
- Wireless Headsets
- Portable Video Game Players
- Notebook and Tablet Computers
- Mobile Communication Devices
- Various applications equipped with buttons